Description
What is the MPLKS Roller Mold Lock?
The MPLKS Roller Mold Lock Set DGMF-MOLD-CLAMPS-PL-MPLKS style is compatible with the MISUMI standard mold latch locking standard-type and heatproof type MPLKS roller mould lock replacement supplied by DGMF Mold Clamps Co., Ltd. used for molding industries.
DGMF MPLKS Roller Mold Lock Set Characteristics：
Part number: MPLKS30/MPLKS60/MPLKS80/MPLKS80S
Components: Set
Max. usable load(2 sets): 7845N
Bushing type: Slim type
Heat resistance temperature: 80°C or lower
DGMF Mold Clamps Co., Ltd supplies mold clamps, injection mold components, machine tools, hopper dryers, and accessories. We are dedicated to offering cost-effective standard plastic mold latch locks, and different models of latch locking units for your choice.
Contact us for more details.
DGMF MPLKS Roller Mold Lock Set Features
1. The MPLKS roller mold lock Enables well-balanced mold opening/closing through its mechanism composed of a Belleville spring, internal rollers, and lock rollers.
2. Its rollers prevent uneven wear.
3. The roller mold lock bushing’s vertically symmetrical design allows a worn piece to be reused by reinstalling it in reverse.
4. The roller mold lock holder’s back recess enables it to be used even on a stepped mold plate.
5. For a heat-proof-type MPLKS roller mold lock set, the adjusting bolt differs from the standard type for identification.
Standard type roller mold lock set: black oxide.
Heatproof type roller mold lock set: Trivalent Chromate.
About slim bushings
1. For MPLKS roller lock set slim bushings, the height of the lock bushing (A dimension) is standardized as 24mm. One side of the molding base installation board is a standard corresponding to the amount of protruding 25mm.
2. When mold is installed in the molding machine, the part where the roller lock set protrudes interferes with the tie bar:
It becomes the damage prevention of the roller lock set and the tie bar. Moreover, there is no trouble in keeping and transporting.
3. Although the heights of bushings (A→24, t1→15.5) become lower, the load and other dimensions remain the same as conventional products.
DGMF MPLKS Roller Mold Lock Set Specifications
DGMF MPLKS Roller Mold Lock Set Latch Device Spec |
||
| SKU | Spec | Type |
| DGMF-MOLD-CLAMPS-PL-MPLKS30 | MPLKS30 | Slim-type |
| DGMF-MOLD-CLAMPS-PL-MPLKS60 | MPLKS60 | Slim-type |
| DGMF-MOLD-CLAMPS-PL-MPLKS80 | MPLKS80 | Slim-type |
| DGMF-MOLD-CLAMPS-PL-MPLKS80S | MPLKS80S | Slim-type |
DGMF MPLKS Roller Mold Lock Set Drawing
DGMF MPLKS Roller Mold Lock Set Installations
Mount the MPLKS roller mold lock set in parallel to the parting line.
The roller lock set can be removed by pulling it in the direction of the arrow in the figure.
MPL/MPLK/MPLKH/MPLKHS Roller Mold Lock Set Load Adjustment and Load Characteristics
1. The opening/closing load can be adjusted using an Allen wrench. The load is maximum when the adjustment bolt is fully tightened, 50% when it is loosened a half rotation, and when it is loosened 1 rotation or more.
※For MPLK10, the load decreases about 25% when the adjustment bolt is loosened a half rotation, and 70% when it is loosened one rotation.
2. The load for mold closing is about 50% of mold opening.
3. A fixing screw is provided on the load adjustment bolt.
4. Loosen it to perform load adjustment, and make sure to tighten it after adjustment is completed.
Note:
Make sure to assemble the right and left units symmetrically for well-balanced operation.
Other similar styles of plastic injection mold latch locking units latch devices
Plastic injection mold latch lock unit latch device series:
HASCO standard latch device Z73, Z170, Z171, Z173, Z174 latch locking unit replacement;
MISUMI standard latch device PLS, PLM, PLL, PLSW, PLSZ, PLMZ, PRKZ, PRLZ, PRKZM, PRLZM, PRLZ, PRSZ, Parting Locks, PLBS, MPLK, MPLKB, MLK, MLKC, MPLKS, MPLKH latch locking unit replacement;
PUNCH standard latch device TYPE-S, TYPE-F latch locking unit replacement;
STRACK standard latch device Z3, Z4, Z5, Z6, Z7 latch locking unit replacement;
DME standard latch device KU, KL, DKL, LL051/101/151/201 latch locking unit replacement;
Meusburger standard latch device E 1808, E 1809, E1820, E 1840 latch locking unit replacement;
RABOURDIN standard latch device REP460 latch locking unit replacement;
PROGRESSIVE standard latch device RPL latch locking unit replacement;
CUMSA standard latch device GS latch locking unit replacement;
Taiwan standard latch device DTP03, DTP04/BSBL, DTP05/BL, DTP06/SLD, DTP07/JH064, DTP08, GBLS latch locking unit replacement;
etc.
Contact the DGMF Mold Clamps Co., Ltd sales team for more details you need.
