Description
What is the Latch Lock LL050?
The Latch Lock LL050 DGMF-MOLD-CLAMPS-PL-LL style is compatible with the D-M-E standard type Jiffy latch lock unit with 050/051/101/151/201 specs mold latch lock device replacement supplied by DGMF Mold Clamps Co., Ltd. used for plastic injection mold locking.
Name: D-M-E-type Jiffy latch lock
Spec: LL050/LL050E/LL051/LL051E/LL101/LL101E/LL151/LL201
DGMF Mold Clamps Co., Ltd supplies mold clamps, injection mold components, machine tools, hopper dryers, and accessories. We are dedicated to offering cost-effective standard plastic mold latch lock units, and different models of latch lock series for your choice.
Contact us for more latch lock device details.
DGMF Latch Lock LL050/051/101/151/201 Features
1. Unique center spindle design, safe and reliable.
2. It is suitable for controlling the sequence of opening and closing molds, and it can also be used for secondary ejector control.
3. To eliminate the possible break of the mold, because it does not require any changed to adjust or may be connected to accidentally drop. Applicable to general or heavy die, each mold needs at least four latch locking sets.
DGMF Latch Lock LL050/051/101/151/201 Specifications
DGMF Jiffy Latch Lock Spec |
|
| SKU | Spec |
| DGMF-MOLD-CLAMPS-PL-LL-050 | LL050 |
| DGMF-MOLD-CLAMPS-PL-LL-050E | LL050E |
| DGMF-MOLD-CLAMPS-PL-LL-051 | LL051 |
| DGMF-MOLD-CLAMPS-PL-LL-051E | LL051E |
| DGMF-MOLD-CLAMPS-PL-LL-101 | LL101 |
| DGMF-MOLD-CLAMPS-PL-LL-101E | LL101E |
| DGMF-MOLD-CLAMPS-PL-LL-151 | LL151 |
| DGMF-MOLD-CLAMPS-PL-LL-201 | LL201 |
DGMF Latch Lock LL050/051/101/151/201 Drawing
DGMF Latch Lock Sets Jiffy Installation Instructions
Jiffy Latch Lock Installation Tips.
1. When installing and using, the insert bar shall not be completely detached from the center insert.
2. According to the size of the mold, it is reasonable to choose different specifications of clamping clips.
3. Accurately set the second mold opening stroke when installing.
Jiffy Latch Lock Installations.
1. All latch bars must be timed closely to prevent cocking of the plate they are actuating.
2. All release bars must also be timed closely to prevent cocking of the plate, which would occur if some latch bars are released before others.
3. Mount the body to a floating or moving plate with screws and dowels, parallel to the parting line. Mount the body about the desired press and mold opening to allow the disengagement of the latch bar from the rocker by the release bar.
4. Engage the latch bar in position on the rocker with the mold closed. (If pre-latch dwell or movement is required, position accordingly.)Measure and cut the bar to the required length. Drill screw mounting holes. (Drill and ream dowel holes after final alignment) Mount the latch bar to the side of the mold.
5. Insert the release bar into the assembly and adjust the amount of the first mold opening. Measure and cut the release bar to the required length. Drill screw mounting holes. (Drill and ream dowel holes after final alignment) Mount the release bar to the side of the mold.
6. Be sure that the final assembly is mounted square and parallel to proper mold surfaces and with proper clearances to ensure free movement and correct alignment during mold operation.
7. A minimum of two units is required per mold. However, four units per mold are recommended. Larger molds may require additional units.
8. When only two units are used, the bodies should be mounted on the center of the mold for balanced operation. However, if there is uneven plate loading to be actuated, four or more units are required.
9. Keep the D-M-E Jiffy Latch-Lok assembly lubricated while in operation.
Other similar styles of plastic injection mold latch lock units latch devices
Plastic injection mold latch lock unit latch device series:
HASCO standard latch device Z73, Z170, Z171, Z173, Z174 latch locking unit replacement;
MISUMI standard latch device PLS, PLM, PLL, PLSW, PLSZ, PLMZ, PRKZ, PRLZ, PRKZM, PRLZM, PRLZ, PRSZ, Parting Locks, PLBS, MPLK, MPLKB, MLK, MLKC, MPLKS, MPLKH latch locking unit replacement;
PUNCH standard latch device TYPE-S, TYPE-F latch locking unit replacement;
STRACK standard latch device Z3, Z4, Z5, Z6, Z7 latch locking unit replacement;
DME standard latch device KU, KL, DKL, LL051/101/151/201 latch locking unit replacement;
Meusburger standard latch device E 1808, E 1809, E1820, E 1840 latch locking unit replacement;
RABOURDIN standard latch device REP460 latch locking unit replacement;
PROGRESSIVE standard latch device RPL latch locking unit replacement;
CUMSA standard latch device GS latch locking unit replacement;
Taiwan standard latch device DTP03, DTP04/BSBL, DTP05/BL, DTP06/SLD, DTP07/JH064, DTP08, GBLS latch locking unit replacement;
etc.
Contact the DGMF Mold Clamps Co., Ltd sales team for more details you need.
