Description
What is the PLSZ Latch Pull Parting Lock Set?
The PLSZ Latch Pull Parting Lock Set DGMF-MOLD-CLAMPS-PL-PLSZ style is compatible with the MISUMI standard mold latch device PLSZ style parting lock set replacement supplied by DGMF Mold Clamps Co., Ltd. used for injection mold opening and closing.
DGMF PLSZ Latch Pull Parting Lock Set Characteristics:
Part number: Parting Lock Sets (PLSZ)
Load capacity: 1t(10KN) or lower
Parts: Set
Application.: For PLSZ
DGMF Mold Clamps Co., Ltd supplies mold clamps, injection mold components, machine tools, hopper dryers, and accessories. We are dedicated to offering cost-effective standard plastic mold latch locks, and different models of latch locking units for your choice.
Contact us for more details.
DGMF PLSZ Latch Pull Parting Lock Set Features
Plastic Mold Component
Mold Opening Controller
Parting Lock Set
Side Mounting Type
Latch pull
DGMF PLSZ Latch Pull Parting Lock Set Drawing
DGMF PLSZ Latch Pull Parting Lock Set Installations
How to mount the PLSZ latch pull parting locks?
(1) Mount 2 or more parting lock sets at symmetrical positions of the mold.
PLSZ: 10KN or less for 1 mold/when mounting 2 sets
PLMZ: 20KN or less for 1mold/when mounting 2 sets
(2) Form bolt holes and reamer holes using NC machining, and install the cam holder parallel to the PL face,
(3) Cut the PLSZ latch lock bar to the necessary length, form the bolt holes and reamer pilot holes, tighten the cam lock with the bolts while pulling it, carry out position adjustment by matching with the actual part, form the dowel holes, and fix the cam lock.
(4) Cut the PLSZ latch lock release bar to the necessary length, and install it perpendicularly to the mold. Make the overhang length of each release bar the same to equalize the release points.
(Maintain proper alignment of the release points to avoid uneven contact and resultant breakage. )
Other similar styles of plastic injection mold latch locking units latch devices
Plastic injection mold latch lock unit latch device series:
HASCO standard latch device Z73, Z170, Z171, Z173, Z174 latch locking unit replacement;
MISUMI standard latch device PLS, PLM, PLL, PLSW, PLSZ, PLMZ, PRKZ, PRLZ, PRKZM, PRLZM, PRLZ, PRSZ, Parting Locks, PLBS, MPLK, MPLKB, MLK, MLKC, MPLKS, MPLKH latch locking unit replacement;
PUNCH standard latch device TYPE-S, TYPE-F latch locking unit replacement;
STRACK standard latch device Z3, Z4, Z5, Z6, Z7 latch locking unit replacement;
DME standard latch device KU, KL, DKL, LL051/101/151/201 latch locking unit replacement;
Meusburger standard latch device E 1808, E 1809, E1820, E 1840 latch locking unit replacement;
RABOURDIN standard latch device REP460 latch locking unit replacement;
PROGRESSIVE standard latch device RPL latch locking unit replacement;
CUMSA standard latch device GS latch locking unit replacement;
Taiwan standard latch device DTP03, DTP04/BSBL, DTP05/BL, DTP06/SLD, DTP07/JH064, DTP08, GBLS latch locking unit replacement;
etc.
Contact the DGMF Mold Clamps Co., Ltd sales team for more details you need.