Description
What are the Parting Line Lock Sets?
The DGMF Parting Line Lock Sets PL0068/88/104 DGMF-MOLD-CLAMPS-MI-PL styles are compatible with MISMI standard mold latch lock sets with a light, medium, and heavy load PLS/PLM/PLL latch devices replacement supplied by DGMF Mold Clamps Co., Ltd.
Plastic Mold Latch Units Parting Line Lock Sets Product Characteristics
Wear-resistant, tough, high load-bearing
Preferred Material
The main body is made of P20, Hook, and pin inserts are made of SKD11.
Powerful function
Control of mold opening and closing sequence
Complete specifications
Three sizes for low, medium, and high loads.
Compact design
Simple structure for easy installation and maintenance
DGMF Mold Clamps Co., Ltd supplies mold clamps, injection mold components, machine tools, hopper dryers, and accessories. We are dedicated to offering cost-effective standard plastic mold latch locks, and different models of latch locks PLS(PL0068), PLM(PL0088), and PLL(PL0104) series for your choice.
Contact us for more details.
DGMF Parting Line Lock Sets Features
1. Compact structure, occupies little installation space.
2. Mechanical mold locking device design, safe and reliable, correctly open the mold, no reaction force.
3. Completely no mold locking load, can be applied to low-pressure molding.
4. There is no self-locked function of mold locking, in the process of mold locking, no matter whether the first or second parting surface is closed first, there is no need to worry about the interference phenomenon.
5. High-frequency annealing treatment at the end of the insert bar, convenient for secondary processing.
DGMF Parting Line Lock Sets PL0068/88/104 Specifications
| DGMF Parting Lock Sets PL0068/88/104 | ||
| SKU | Spec | A/mm |
| DGMF-MOLD-CLAMPS-MI-PL0068 | PLS | 68 |
| DGMF-MOLD-CLAMPS-MI-PL0088 | PLM | 88 |
| DGMF-MOLD-CLAMPS-MI-PL0104 | PLL | 104 |
DGMF Parting Line Lock Sets PL0068/88/104 Drawing
DGMF Parting Line Lock Sets PLS PLM PLL 0068 0088 0104 Details
DGMF Parting Lock Sets Installation Instructions
Please use more than 2 sets of this mold-locking component symmetrically.
Regarding the applicable load of the Parting Lock Sets.
DGMF-MOLD-CLAMPS-MI-PL0068-PLS→1.0T or less (2 sets)
DGMF-MOLD-CLAMPS-MI-PL0088-PLM→1.8T or less (2 sets)
DGMF-MOLD-CLAMPS-MI-PL0104-PLL→4.0T or less (2 sets)
1. Cut the insert bar to the required length. Then machine the bolt holes to eliminate the gap between the cam locking block and the sliding block and lock the screws under the closed mold condition.
Important: Machine the pin holes together after the physical alignment.
2. Ensure that the cam locking block and sliding block of all plastic mold latch locking units are disengaged at the same time, otherwise it will cause damage to one side of the mold latch lock due to concentrated force.
3. The plastic injection mold lock unit is a precision device, please locate and install it symmetrically, according to the size and load of the mold, and choose the corresponding quantity (more than 2 sets) and specifications (three specifications are available).
4. Ensure that all the bar strokes for installing the mold parting line lock can simultaneously disengage the pull hook and locking block when the mold is opened, otherwise, a single set of force will cause the mold latch locking unit to fracture.
5. Carry out the function test to check whether the parts of the mold latch locking mechanism are smooth and whether the stroke matches.
6. If the mold latch locking device assembly needs to be repaired and changed, please remove the chain mold device first before subsequent operations.
Plastic injection mold opening diagram
DGMF Parting Line Lock Sets PL0068/88/104 Applications
How to install the plastic mold parting lock sets?
1. Please install the roller lock sets symmetrically when mold closing, at least 2 sets in pairs for 1 mold (user can select the quantity according to the actual conditions, available 3 sizes)
2. Install according to the installation figures as below.
3. Carry out functional testing, and check whether the individual parts of the latch lock units move smoothly and the stroke is applicable.
4. The mounting faces for the cam holder, slide holder, and release bar must be machined parallel to the mold guide system
5. Make the overhang length of each release bar the same to equalize the timing of the release
6. If need to maintain, please remove the latch locks first. After installation, carry out a functional test on a matched mold machine or Injection machine, and check whether the individual parts of the latch lock units move smoothly and whether the stroke is applicable.
Other similar styles of plastic injection mold latch lock units latch devices
Plastic injection mold latch lock unit latch device series:
HASCO standard latch device Z73, Z170, Z171, Z173, Z174 latch locking unit replacement;
MISUMI standard latch device PLS, PLM, PLL, PLSW, PLSZ, PLMZ, PRKZ, PRLZ, PRKZM, PRLZM, PRLZ, PRSZ, Parting Locks, PLBS, MPLK, MPLKB, MLK, MLKC, MPLKS, MPLKH latch locking unit replacement;
PUNCH standard latch device TYPE-S, TYPE-F latch locking unit replacement;
STRACK standard latch device Z3, Z4, Z5, Z6, Z7 latch locking unit replacement;
DME standard latch device KU, KL, DKL, LL051/101/151/201 latch locking unit replacement;
Meusburger standard latch device E 1808, E 1809, E1820, E 1840 latch locking unit replacement;
RABOURDIN standard latch device REP460 latch locking unit replacement;
PROGRESSIVE standard latch device RPL latch locking unit replacement;
CUMSA standard latch device GS latch locking unit replacement;
Taiwan standard latch device DTP03, DTP04/BSBL, DTP05/BL, DTP06/SLD, DTP07/JH064, DTP08, GBLS latch locking unit replacement;
etc.
Contact the DGMF Mold Clamps Co., Ltd sales team for more details you need.
