Description
What is the Latch Device Z171?
The Latch Device Z171/1/2/3 DGMF-MOLD-CLAMPS-PL-Z171 styles are compatible with German standard Hasco standard Z171/1, Z171/2, Z171/3 latch lock device replacement supplied by DGMF Mold Clamps Co., Ltd. used in mold locking assembly for plastic injection molding.
The Z171 plastic mold latch lock device is the alternative to the classic latch lock Z170 style. The Z171 plastic mold latch lock unit is designed with a simple, easy to install, and the height is adjustable when operating.
DGMF Mold Clamps Co., Ltd supplies mold clamps, injection mold components, machine tools, hopper dryers, and accessories. We are dedicated to offering cost-effective standard plastic mold latch locks, and different models of latch locks Z170/Z171/Z173/Z174 series for your choice.
Contact us for more details.
DGMF Latch Device Z171/1/2/3 Features
1. The product design is simple and easy to install; the installation direction of the main body, the insertion bar, and the pull bar is parallel and right angle to the mold’s opening running direction
2. When installing the latch lock device, please install two sets symmetrically on the mold; because if not symmetrically installed may lead to only a single set of latch lock devices force, and unbalanced force will be forced, the imbalance of force will likely lead to the mold latch locking unit broken.
3. The latch locking device is a precision product, please install it in the precision mold embryo use; The latch locking device parts are also precision production assembly, please do not use it with other self-processed parts.
4. After the latch locking set is installed on the mold, please ask the staff to test the sequence of opening and closing the mold slowly to confirm the correct installation and use.
DGMF Latch Device Z171/1/2/3 Specifications
DGMF Z171 Latch Lock Device Spec |
|
SKU | Type |
DGMF-MOLD-CLAMPS-PL-Z1711 | Z171-1 |
DGMF-MOLD-CLAMPS-PL-Z1712 | Z171-2 |
DGMF-MOLD-CLAMPS-PL-Z1713 | Z171-3 |
The plastic injection mold latch lock device mold latch locking unit Z170/1/2/3 close style is available at DGMF Mold Clamps Co., Ltd.
DGMF Latch Device Z171/1/2/3 Drawing
DGMF Latch Device Z171/1/2/3 Details
DGMF Latch Device Z171/1/2/3 Installation Instructions
Please install the latch device Z171 locking unit parallel to the parting surface.
The lock bar can be cut to the required length by yourself, the threaded holes and locating pins can be processed, and the screws can be locked in the closed mold state.
Note: Before fixing the lock bar, make sure the mold is in a fully closed state. Before fixing the locking bar, make sure the mold is fully closed and the coating between the locking bar and the tumbler pin has been eliminated. Then lock the screws.
The insertion bar can be made to the desired length. Install them perpendicular to the parting surface.
Please install more than 2 sets of Z171 latch lock devices in symmetrical positions on the mold.
After installing the product, it is recommended to test the sequence of opening and closing the mold on the molding machine or injection molding machine at a slow speed to ensure the accuracy of the action, and to ensure the accuracy of the action.
DGMF Latch Device Z171/1/2/3 Applications
Other similar styles of plastic injection mold latch lock units latch devices
Plastic injection mold latch lock unit latch device series:
HASCO standard latch device Z73, Z170, Z171, Z173, Z174 latch locking unit replacement;
MISUMI standard latch device PLS, PLM, PLL, PLSW, PLSZ, PLMZ, PRKZ, PRLZ, PRKZM, PRLZM, PRLZ, PRSZ, Parting Locks, PLBS, MPLK, MPLKB, MLK, MLKC, MPLKS, MPLKH latch locking unit replacement;
PUNCH standard latch device TYPE-S, TYPE-F latch locking unit replacement;
STRACK standard latch device Z3, Z4, Z5, Z6, Z7 latch locking unit replacement;
DME standard latch device KU, KL, DKL, LL051/101/151/201 latch locking unit replacement;
Meusburger standard latch device E 1808, E 1809, E1820, E 1840 latch locking unit replacement;
RABOURDIN standard latch device REP460 latch locking unit replacement;
PROGRESSIVE standard latch device RPL latch locking unit replacement;
CUMSA standard latch device GS latch locking unit replacement;
Taiwan standard latch device DTP03, DTP04/BSBL, DTP05/BL, DTP06/SLD, DTP07/JH064, DTP08, GBLS latch locking unit replacement;
etc.
Contact the DGMF Mold Clamps Co., Ltd sales team for more details you need.