Description
What is the S136 DGMF Air Poppet Valve Injection Mold?
The DGMF-MOLD-CLAMPS-S-VA style S136 DGMF Air Poppet Valve Injection Mold is close to Cumsa standard air poppet valves for injection molding. The precision mold air valve with precision, high-rust resistance, accurate return, and is not jammed.
This air poppet is improved according to the specification of the Cumsa air poppet valve, internal improvements have been made to make the life longer, and better ejection effect, not only can replace the original product, but the price is very affordable relative to the original.
S136 DGMF Air Poppet Valve Product Characteristics
Interchangeable, easy to disassemble;
Ultra-high precision;
High concentricity;
Smooth airflow;
Rust-proof and wear-resistant;
No jamming, accurate return.
S136 DGMF Air Poppet Valve Injection Mold Features
1. Made of S136 material, anti-rust and wear-resistant.
2. Vacuum treatment, uniform hardness, HRC56-58
3. Utilizing the principle of air diffusion, smooth air discharge, and precise return position without jamming.
Injection Mold Component S136 DGMF Air Poppet Valve Specifications
S136 DGMF Air Poppet Valves Specifications |
||
| DGMF-MOLD-CLAMPS-S-VA0612 | S136 Stainless Steel | M6X12 |
| DGMF-MOLD-CLAMPS-S-VA0812 | S136 Stainless Steel | M8X12 |
| DGMF-MOLD-CLAMPS-S-VA1012 | S136 Stainless Steel | M10X12 |
| DGMF-MOLD-CLAMPS-S-VA1216 | S136 Stainless Steel | M12X16 |
| DGMF-MOLD-CLAMPS-S-VA1620 | S136 Stainless Steel | M16X20 |
| DGMF-MOLD-CLAMPS-S-VA2024 | S136 Stainless Steel | M20X24 |
S136 DGMF Air Poppet Valve Injection Mold Drawing
S136 DGMF Air Poppet Valve Injection Mold Installation
Common problems and troubleshooting of the DGMF Air Poppet Valves
1. The air poppet valve is stuck back to the position is not normal, and the inner core protrudes
Check:
① Check the air poppet valve outer diameter and mounting holes with the bit of excess surplus is not too large
② Check whether the air roof into the position and air hole clearance is too small
Solution:
① Mounting holes with a large amount of excess plastic deformation, the inner core gap is reduced, increase the mounting holes, to improve the mounting hole machining accuracy
② Air hole clearance is too small, the positioning piece is stuck or dead, back to normal, increase the size of the air hole to avoid, and improve the accuracy of air hole machining
2. Multiple air poppet valves partially open
Check:
① Check the air pressure of the air compressor
② Check whether the airflow of the mold air pressure pipe is too small
Solution:
① Increase the air pressure of the air compressor
② Increase the diameter of the mold air pressure pipeline or air inlet pipeline grouping into the air
3. Air poppet valve flying out
Check:
① Check whether the air pressure of the air compressor is normal
② Check whether the size of the mold mounting hole is too large
Solution:
Improve the machining accuracy of the mounting holes
4. The rubber into air poppet valve
Check:
Check whether there is iron slag, grease, and other residues in the mold pipeline.
Solution:
Clean up the mold pipeline iron slag, grease, and other residues
Other DGMF Air Poppet Valves
DGMF Mold Clamps Co., Ltd supplies mold clamps, injection mold components, and machine tools.
Besides the S136 air poppet valves, DGMF Mold Clamps Co., Ltd supplies air poppet valves with Z491 air valves, E1673 air valves, SUS420 air poppet valves, 40CR air poppet valves, DME air poppets, VA air poppets, Cumsa air poppet valves, etc.
Contact us for more details of the DGMF air poppet valves you want. Thank you.
